Table of Contents
Advertisement
QQ
3.1.5 Removing the mechanism control board
3 7 63 1515 0
(See Fig.6)
• Remove the front panel assembly, heat sink, rear bracket and
bottom chassis assembly.
(1) From the inside of the bottom chassis assembly, discon-
nect the card wire from the connector
anism control board.
(2) Disconnect the wire from the connector
mechanism control board.
(3) Remove the three screws G attaching the mechanism con-
trol board.
(4) Take out the mechanism control board from the bottom
chassis assembly.
Reference:
• When attaching the mechanism control board, set the pro-
jections d of the bottom chassis assembly in the holes of the
mechanism control board.
• After attaching the mechanism control board, fix the wire
with the wire clamp as before.
3.1.6 Removing the cassette mechanism assembly
(See Fig.7)
• Remove the front panel assembly, heat sink, rear bracket and
bottom chassis assembly.
(1) From the inside of the bottom chassis assembly, discon-
nect the card wire from the connector
anism board.
(2) Disconnect the wire from the connector
TE
L 13942296513
mechanism board.
(3) Remove the four screws H attaching the cassette mecha-
nism assembly.
Reference:
After attaching the mechanism board, fix the wire with the wire
clamp as before.
www
.
http://www.xiaoyu163.com
CN403
on the mech-
CN402
CN403
on the mech-
CN402
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
G
on the
d
d
Wire clamp
Mechanism control board
H
Q Q
on the
3
6 7
1 3
1 5
CN402
Wire clamp
co
.
9 4
2 8
Mechanism control board
Bottom chassis assembly
CN402
CN403
d
Fig.6
Cassette mechanism assembly
0 5
8
2 9
9 4
2 8
CN403
H
Bottom chassis assembly
Fig.7
m
9 9
G
9 9
H
(No.MA220)1-9
Hide quick links:
Advertisement
Table of Contents
