NETGEAR WGR614 v6 Reference Manual page 69

Figure 6-11: Remote Management menu
To configure your router for Remote Management:
Select the Turn Remote Management On check box.
1.
Specify what external addresses will be allowed to access the router's remote management.
2.
Note: For enhanced security, restrict access to as few external IP addresses as practical.
To allow access from any IP address on the Internet, select Everyone.
a.
To allow access from a range of IP addresses on the Internet, select IP address range.
b.
Enter a beginning and ending IP address to define the allowed range.
To allow access from a single IP address on the Internet, select Only this computer.
c.
Enter the IP address that will be allowed access.
Specify the Port Number that will be used for accessing the management interface.
3.
Web browser access normally uses the standard HTTP service port 80. For greater security,
change the remote management Web interface to a custom port by entering that number in the
box provided. Choose a number between 1024 and 65535, but do not use the number of any
common service port. The default is 8080, which is a common alternate for HTTP.
Click Apply to have your changes take effect.
4.
A d va n ce d C on figu ra tion of th e R ou ter
Reference Manual for the 54 Mbps Wireless Router WGR614 v6
202-10099-01, April 2005
6 -1 7