Table of Contents
Advertisement
2.
If you need to install the driver manually, refer each Windows OS
to the following CD-Rom directory path: D:\USB\Driver\<Windows
OS>.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).
3.
Click on "A02-UP1-W54" icon to select Wireless USB Adapter
Home Page.
4.
Select
operating system, and the install wizard will begin installing the
software. Follow the install wizard instructions to complete the
installation.
The installation program will help you to setup the Wireless LAN utility.
Be noted that the Windows XP have its own Wireless Utility; you can either
use the utility of Windows XP or the provided utility.
When the Wireless LAN Adapter was installed, you will see the icon on the
Windows task bar. The user can configure the wireless settings using the
Wireless Adapter Configuration Utility. Double-click the utility icon that
appears in the taskbar
Icon
When the icon in the toolbar represents in full green color then the signal
strength has an excellent performance with the AP, if it represents in yellow
color then the signal strength has a fair performance with the AP, and if the
icon represents no color, then the signal strength has a worst performance
with the wireless station.
"XP / 2K/ ME / 98" or "Vista", depending on your
Quality of Signal
Excellent
Good
Waiting connection
Not connected
Wireless USB Adapter
USER MANUAL
10
Advertisement
Table of Contents
