NETGEAR WGR614 v8 User Manual page 17

Tip: You can connect to the wireless router by typing either of these URLs in the
address field of your browser, and then pressing Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
If these URLs do not work, you must type the IP address of the router, for
example, http://www.192.168.1.1.
2. Enter admin for the router user name and your password (or the default, password). For
information about how to change the password, see
on page 2-20.
Note: The router user name and password are not the same as any other user name or
password you might use to log in to your Internet connection.
The Checking for Firmware Updates screen appears unless you previously cleared the Check
for Updated Firmware Upon Log-in check box.
Figure 1-2
If the router discovers a newer version of software, you are asked if you want to upgrade to the
new software (see
firmware is available, the no new firmware available message displays.
3. In the main menu on the left, select Basic Settings under Setup. The Basic Settings screen
displays showing the wireless router's home page and suggested default settings.
Configuring Internet Connectivity
"Upgrading the Router Software" on page 6-7
v1.1, May 2008
54 Mbps Wireless Router WGR614v8 User Manual
"Changing the Administrator Password"
for details). If no new
1-3