Ec-Declaration Of Conformity - Husqvarna 543 RBK Operator's Manual

Approved accessories
Grass blade/grass cutter
Trimmer head
Support cup
The following attachments are recommended for the specified models.
Attachments
Hedge trimmer attachment with shaft HA
850
Brushcutter attachment with SA 850 shaft.
Brushcutter attachment with GTA 850 shaft. 967 11 31-01
EC-declaration of conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
543 RBX, 543 RBK with serial numbers dating from 2012 onwards (the year is clearly stated on the rating plate, followed
by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2007, EN ISO 11806-1:2011, EN ISO 11806-2:2011
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out voluntary type
approval for Husqvarna AB.
The certificate has the number:
543 RBX, 543 RBK - SEC/12/2362
Huskvarna, 21 December 2012
Bengt Frögelius, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
28 – English
TECHNICAL DATA
Type
Multi 300-3 (Ø 300 3 teeth)
Multi 255-3 (Ø 255 3 teeth)
Grass 275-4 (Ø 275 4 teeth)
Grass 255-4 (Ø 255 4 teeth)
T35, T35x (Ø 2.4 - 3.0 mm cord)
T45x (Ø 2.7 - 3.3 mm cord)
T55x (Ø 2.7 - 3.3 mm cord)
F35 (Ø 2.0 - 3.5 mm cord)
Fixed
Art No.
967 02 67-01
967 02 69-01
Cutting attachment guard, Art. no.
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03
537 33 16-03
-
Use with
543 RBK
543 RBK
543 RBK