Configuring Your Computer For The Barricade Print Server; Configuring Your Computer For The Barricade Print Server For Windows 95/98/Nt/Me/2000 - SMC Networks SMC7004ABR Quick Installation Manual

Configuring Your Computer for the Barricade Print Server

If you are not connecting your printer to your Barricade, skip this section.
With the Barricade's built-in print server, you can connect your printer to the Barricade and print
from any computer on your network. Each computer needs to have a "client" installed that will
communicate with the Barricade's print server. Windows 2000 and UNIX and Linux operating
systems have a print client already installed. If you are running Windows 95, 98, ME, 2000 or
NT, you must use the SMC Barricade Print Server Monitor as your print client.
Configuring Your Computer for the Barricade Print Server for
Windows 95/98/NT/ME/2000
Step 1: Installing SMC Barricade Print Server Monitor
You must first install the software that will allow your programs to print to the printer attached to
the Barricade.
6. Insert the Installation CD into your CD-ROM drive.
7. Click "Start" and "Run..."
8. Type "D:\PrintSvr\Setup" and click "OK."
9. InstallShield will guide you through the installation process.
Click "Next >" for each window and "Finish" when
complete.
10. Windows must reboot for the changes to take place. When
asked if you want to reboot now, select yes and click "OK."
Page 33