Ssd - HP ZBook 15u G3 Maintenance And Service Manual

SSD

Description
Solid-state drive
512 GB, PCIe 3x4
256 GB, PCIe 3x4
256 GB, SATA-3 self-encrypting drive Opal-2 MLC
256 GB, SATA-3 TLC (not available on mobile workstation)
180 GB, SATA-3, self-encrypting drive Opal-2 MLC
180 GB, SATA-3 MLC
128 GB, SATA-3 TLC (not available on mobile workstation)
Before removing the SSD, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery (see
Remove the SSD:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE:
Reverse this procedure to reassemble and install the mSATA drive.
Bottom cover on page
Battery on page
mSATA drives are designed with notches to prevent incorrect insertion.
35).
40).
Component replacement procedures
Spare part number
823959-001
823958-001
823957-001
823956-001
823955-001
823954-001
823953-001
43