Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
▶
Enables or disables the system wake up by PS/2 keyboard.
[Any Key]
[Hot Key]
[Disabled]
▶
Hot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears
when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key.
Boot
Sets the sequence of system boot devices.
▶
Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled]
Shows the logo in full screen.
[Disabled]
Shows the POST messages.
▶
GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec
upon bootup.
[Enabled]
The system boots straight to the BIOS setup by long pressing the power
button about 4 seconds when the system is off.
[Disabled]
Disables this function.
▶
Bootup NumLock State [On]
Select the keyboard NumLock state upon bootup.
▶
AUTO CLR_CMOS [Disabled]
Enables or disables the CMOS data to be resumed automatically when the booting
process hang-up over 5 seconds.
▶
Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS
installation requirement. This item will become un-selectable and will be configured
automatically by BIOS when Windows 8.1/ 10 WHQL Support is enabled.
[UEFI]
[LEGACY+UEFI]
▶
FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶
Boot Option Priorities
These items are used to prioritize the installed boot devices.
60
BIOS Setup
Enables the system to be awakened from S3/ S4/ S5 state when
activity of any key on PS/2 keyboard is detected.
Enables the system to be awakened from S3/ S4/ S5 state when
activity of hot key on PS/2 keyboard is detected.
Disables this function.
Enables UEFI BIOS boot mode support only.
Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.