Installation Instructions - LG DLEY1701VE Owner's Manual

18

INSTALLATION INSTRUCTIONS

Reversing the Door (cont.)
7. Lift out the t o top interloc buttons.
Lift out the two grey interlock buttons from the top of
the outer door and set them aside for later use.
8. Lift out the grey interloc button in the side of the
door.
Make sure to remove the spring with the interlock
button and to keep the two together. Set the interlock
button aside. Do not confuse with interlock buttons
from the top of the outer door.
9. Remove the side loc rod.
Remove the side lock rod from
the lower hinge bracket by lifting
the top end of the rod and sliding
it toward the top of the door. The
spring should remain attached to
the lock rod. Set the lock rod aside.
10. Remove the top loc rod.
a. Slide the lock rod to the right to remove it from the
hinge assembly on the left side.
MFL67731050_en_141213.indd 18
interlock buttons
side lock rod
Spring
b. While sliding the lock rod right, lift the right end up
and out of the guides.
NOTE
Do not remove the t o inner lock rods (see page 17)
located underneath the top lock rod. They do NOT
need to be reversed
11. Remove the upper hinge pivot.
Once the top lock rod has been removed, the
hinge pivot can easily be removed from the hinge
assembly on the upper left and set aside.
upper hinge
assembly
upper hinge
pivot
12. Reverse the upper hinge assembly and hinge
filler.
Lift out the upper hinge filler (on the right) and set it
aside.
Carefully lift the upper hinge assembly (on the left)
out of the outer door frame, using a small flat blade
screwdriver if necessary. Rotate the hinge assembly
180 degrees and install it on the upper right side of
the outer door. You will need to press firmly to install
the hinge assembly.
The hinge pivot removed in step 11 ill be installed
later.
upper hinge assembly
upper hinge pivot
2014.12.13 5:21:32 PM