NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual
To restrict access based on MAC addresses, follow these steps:
1. In the Advanced section of the main menu, click Wireless Settings
2. From the Wireless Settings menu, click Setup Access List to display the Wireless Card Access
List.
Figure 2-6
3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup dialog opens and displays a list of currently active wireless cards and their
Ethernet MAC addresses.
Figure 2-7
2-12
v2.1, July 2007
Safeguarding Your Network