Lan Port (Local Ports); Wireless Port; Show Statistics - NETGEAR N750 User Manual

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

LAN Port (Local Ports)

MAC Address. The wireless router LAN port Ethernet MAC address.
IP Address. The wireless router LAN port IP address. The default is 192.168.1.1.
DHCP. If Off, the wireless router does not assign IP addresses to PCs on the LAN. If On, the
wireless router does assign IP addresses to PCs on the LAN.
IP Subnet Mask. The IP subnet mask used by the wireless router LAN. The default is
255.255.255.0.

Wireless Port

See on page 29 for a more detailed description of these settings.
Wireless Settings Screen
Name (SSID). The Wi-Fi network name (SSID) for the wireless network. The default for a or n
operation is NETGEAR-5G. The default for b or g operation is NETGEAR.
Region. The country where the unit is set up for use.
Channel. The current channel, which determines the operating frequency.
Mode. The current Mbps setting.
Wireless AP. Indicates if the access point feature is enabled. If disabled, the Wireless LED
on the front panel is off.
Broadcast Name. Indicates if the wireless router is configured to broadcast its SSID.
Wi-Fi Protected Setup b/g/n. This indicates whether Wi-Fi Protected Setup is configured for
the b/g/n network.
Wi-Fi Protected Setup a/n. Indicates whether Wi-Fi Protected Setup is configured for the a/n
network.

Show Statistics

Click the Show Statistics button on the Router Status screen to display a screen similar to
this:
54 | Chapter 5. Network Maintenance