Monitor/Operation; Condition List - Mitsubishi Electric EB-50GU-A Instruction Book

4. Monitor/Operation

This chapter explains how to monitor and operate the connected unit groups and to check the measurement
data, malfunctioning units, units whose filter sign is triggered, and AHC status.

4-1. Condition List

This section explains how to monitor the operation conditions of all groups collectively (see section 4-1-1) or
groups per block (see section 4-1-2) and also explains how to operate each group (see section 4-1-3), groups
per block (see section 4-1-4), or all groups collectively (see section 4-1-5).
After login, the Overview display of the Condition List screen will appear, which shows the operation conditions
of all air conditioning unit groups, LOSSNAY unit (ventilator) groups, general equipment groups, and Air To Water
(PWFY) unit groups.
To access the Condition List screen from the other screen, click [Monitor/Operation] in the menu bar, and then
click [Condition List].
4-1-1. Checking the operation conditions of all groups
On the Overview display of the Condition List screen, the operation conditions of all groups can be monitored.
The operator can also check the unit malfunctions on this screen and prevent the units from being left on
unintentionally.
Update
Click to show the most
recent operation conditions.
Batch Operations
Click to operate the units in
all groups at once.
Item
Block/Overview
Update
Batch Operations
Number of units whose filter
sign is turned on *1
Number of units in error
*1 The item will not appear if the number of units is "0."
Click [Block] to display the operation conditions of groups per block, and click [Overview]
to display the operation conditions of all groups.
Click to show the most recent operation conditions.
When [Auto] is selected, the operation conditions are updated automatically every minute.
Click to operate the units in all groups at once. (See section 4-1-5.)
The number of units under the control of EB-50 whose filter sign is currently turned on will
appear. Clicking "
Note: This item will not appear if the [Filter Sign Display] is set to [OFF] on the Basic System
settings screen, accessible via the Web Browser for Initial Settings.
The number of units under the control of EB-50 that are currently in error will appear.
*1
Clicking " " will bring up the Malfunction List screen. (See section 4-3.)
Description
" will bring up the Filter Sign List screen. (See section 4-4.)
11
Number of units whose
filter sign is turned on
Number of units in error
Block/Overview
Weekly schedule number
Indicates the weekly
schedule that is currently
effective.
Group icons
The icons indicate the
operation conditions of
groups.
Click the icon to switch to
the operation screen.