Monitor/Operation; Condition List - Mitsubishi Electric EB-50GU-A Instruction Book

4. Monitor/Operation

This chapter explains how to monitor the operation conditions of all groups collectively and how to operate each
group or all groups collectively.

4-1. Condition List

This section explains how to monitor the operation conditions of all groups collectively (see section 4-1-1) and
also explains how to operate each group (see section 4-1-2), or all groups collectively (see section 4-1-3).
After login, a Condition List screen will appear, which shows the operation conditions of all air conditioning unit
groups, LOSSNAY unit (ventilator) groups, general equipment groups, and Air To Water (PWFY) unit groups.
4-1-1. Checking the operation conditions of all groups
On the Condition List screen, the operation conditions of all groups can be monitored. The operator can also
check the unit malfunctions on this screen and prevent the units from being left on unintentionally.
Update
Click to show the most
recent operation conditions.
Group name
Group icons
The icons indicate the
operation conditions of
groups.
Click the icon to switch to
the operation screen.
Item
Update
Batch Operations
Group name
Operation mode
Set temperature
Room temperature
Room humidity
Click to show the most recent operation conditions.
Click to operate the units in all groups at once. (See section 4-1-3.)
The name of the group will appear.
The operation mode of the group will appear.
The set temperature of the group will appear.
Note: For Air To Water (PWFY) unit groups, the set water temperature will appear.
Note: The temperature unit (°C or °F) can be set on the Basic System settings screen, accessible
via the Web Browser for Initial Settings.
Indoor unit return air temperature will appear.
Note: The temperature shown may be different from the actual room temperature.
Note: For Air To Water (PWFY) unit groups, the current water temperature will appear.
Note: The temperature unit (°C or °F) can be selected on the Basic System settings screen,
accessible via the Web Browser for Initial Settings.
The reading of the indoor unit return air humidity or the humidity sensor on the ME remote
controller (Smart ME controller) will appear.
Note: The value will not appear if the indoor unit does not have a humidity measurement function.
Note: If a ME remote controller (Smart ME controller) is connected to the group and the built-in
humidity sensor is enabled, the reading of the sensor will appear.
Note: The indoor unit return air humidity has priority to be displayed over the reading of the
humidity sensor on the ME remote controller (Smart ME controller).
Description
10
Batch Operations
Click to operate the units in
all groups at once.
Weekly schedule number
Indicates the weekly
schedule that is currently
effective.
Operation mode
Set temperature
Room humidity
Room temperature