Panasonic VIERA TH-P58S20Z Operating Instructions Manual page 56

FAQs
Chaotic image, noisy
No image can be displayed
Blurry or distorted image
(no sound or low volume)
Unusual image is displayed
"Shop" appears on screen
at switch on
No sound is produced
Sound level is low
or sound is distorted
Unusual sound from the
display unit
Sound is unusual
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
Due to the digital reception technologies involved, quality of the Digital TV signals may be
relatively low in some cases, despite good reception of Analogue TV channels.
Unable to receive signals
with a high-performance
aerial
Interference or
frozen / disappearing
image in Digital TV
56
Problem
●
Change the setting of "P-NR" in the Picture Menu (to remove
noise). (p. 24)
●
Check nearby electrical products (car, motorcycle,
fluorescent lamp).
●
Is "Colour" or "Contrast" in the Picture Menu set to the
minimum? (p. 24)
●
Reset channels (p. 30 and p. 31).
●
Turn off the TV with Mains power On / Off switch, then turn it
on again.
●
"Shop" was selected in "Auto Tuning" (p. 12)
Reset settings in "Shipping Condition" (p. 34), then select
"Home" in "Auto Tuning" (p. 12)
●
Is "Sound Mute" active? (p. 10)
●
Is the volume set to the minimum?
●
Sound signal reception may be deteriorated.
●
Set "MPX" in the Sound Menu to "Mono" (p. 25).
●
When power is on, drive noise may be heard from inside the
display unit (not a sign of faulty operation).
●
Set the sound setting of the connected equipment to "2ch
L.PCM".
●
Check the "HDMI1 / 2 / 3 Input" setting in the Sound Menu.
(p. 26)
●
If digital sound connection has a problem, select analogue
sound connection. (p. 51)
●
Is the HDMI cable connected properly? (p. 43, 48 and p. 49)
●
Turn Off the TV and equipment, then turn them On again.
●
Check an input signal from the equipment. (p. 52)
●
Use an equipment compliant with EIA/CEA-861/861B.
●
Install an aerial individually for the TV and VCR
(or use a splitter).
TV
Aerial
Input
terminal
VCR
●
Check "Digital TV Signal Condition" (p. 30).
If "Signal Quality" is displayed in red, check aerial. If problem
persists, consult your local Panasonic dealer.
●
Turn the TV off with the Mains power On / Off switch, then
turn it On again.
Actions
(Individual aerial)
Splitter
Aerial Output
Aerial Input
Aerial Output
(Individual aerial)