Panasonic VIERA TH-P58S20Z Operating Instructions Manual page 26

Menu Item
MPEG Optical
Level
HDMI1 / 2 / 3
Input
Reset
Sound Defaults
Input
Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset
PC Settings
H-pos
V-pos
Reset DVI
Position
Settings
Off Timer
Child Lock
Favourites
Edit
Channel List
Auto Tuning
Manual Tuning Sets the TV channels manually (p. 30 and p. 31)
Update
Channel List
Signal
Condition
Teletext
Preferred
Subtitles
Side Panel
26
Adjustments / Configurations (alternatives)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT
terminal as the initial setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is louder comparing with the other types of audio track.
●
Digital TV mode only
Select to fit the input signal (Digital / Analogue) (p. 51).
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
●
HDMI input mode only
Press the OK button to reset settings of the present Mode, Balance,
Headphone Volume and Surround in the Sound Menu to the default.
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs.
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
PC sync signal type (H & V / SOG)
H & V : by the horizontal and vertical signals from your PC
SOG : Sync on Green sync from your PC
Press the OK button to reset the PC Setup settings to the default.
Adjusts horizontal position settings of DVI
Adjusts vertical position settings of DVI
Press the OK button to reset the DVI Position Settings to the default.
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 13)
Locks a channel / AV input to prevent access to it (p. 32)
Creates list of favourite channels (Digital TV mode) (p. 29)
Skips the unwanted channels or edits channels (p. 29 and p. 31)
Sets all Digital TV or Analogue TV channels automatically (p. 30 and p. 31)
Updates the channel list while keeping your settings (Digital TV mode) (p. 30)
Checks the Digital TV signal condition (p. 30)
Teletext display mode (FASTEXT / List) (p. 17)
Selects the default language for Digital TV subtitles (depending on the
broadcaster) (English / Maori / French / German / Italian / Spanish /
Korean / Chinese-Mandarin / Chinese-Cantonese / Japanese / Hindi)
Increases the brightness of the side panel (Off / Low / Mid / High)
●
The recommended setting is "High" to prevent panel "image retention".
●
Set to the minimum level if noise occurs