NETGEAR DG834GUV5 User Manual page 44

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual
3. To enable keyword blocking, select one of the following:
• Per Schedule. Turn on keyword blocking according to the settings on the Schedule
screen.
• Always. Turn on keyword blocking all the time, independent of the setting in the Schedule
screen.
4. Enter a keyword or domain in the Keyword field, click Add Keyword, and then click Apply.
Some examples of keyword applications are shown in the following chart.
Keyword Result
XXX Block the URL http://www.badstuf.com/xxx.html.
.com Only websites with other domain suffixes (such as .edu or .gov) can be
viewed.
. ( a period) Block all Internet browsing access.
Up to 32 entries are supported in the Keyword list.
Note: If you block sites, you can set up the modem router to log attempts to access
them. See
5. To delete a keyword or domain, select it from the list, click Delete Keyword, and then click
Apply.
6. To specify a trusted user, enter that computer's IP address in the Trusted IP Address field,
and then click Apply.
You can specify one trusted user, which is a computer that will be exempt from blocking and
logging. Since the trusted user will be identified by an IP address, you should configure that
computer with a fixed IP address.
7. Click Apply to save your settings.
3-4
"Viewing, Selecting, and Saving Logged Information" on page
v1.0, May 2009
4-9.
Protecting Your Network