NETGEAR DG834GUV5 User Manual page 30

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual
Configuring WEP
To configure WEP data encryption:
1. Log in to the modem router at its default LAN address of http://10.0.0.2 with its default user
name of admin, and default password of admin, or using whatever user name, password, and
LAN address you have chosen for the modem router.
2. From the main menu, select Wireless Settings to display the Wireless Settings screen.
3. In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button:
Figure 2-3
4. Select the Authentication Type: Automatic, Open System, or Shared Key. The default is
Open System.
Note: The authentication scheme is separate from the data encryption. You can select
an authentication scheme that requires a shared key but still leaves the data
transmissions unencrypted. If you require strong security, use both the Shared
Key and WEP encryption settings.
5. Select the Encryption Strength setting:
• WEP (Wired Equivalent Privacy) 64-bit encryption. Enter 10 hexadecimal digits (any
combination of 0–9, a–f, or A–F).
• WEP (Wired Equivalent Privacy) 128-bit encryption. Enter 26 hexadecimal digits (any
combination of 0–9, a–f, or A–F).
6. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and Access Points in your
network:
2-8 Configuring Your Wireless Network and Security Settings
v1.0, May 2009