Table of Contents
Advertisement
3.
Slide the side of the mounting device attached to the thin client (1) over the other side of the mounting
device (2) on the device on which you want to mount the thin client. An audible 'click' indicates a secure
connection.
CAUTION:
make sure both the release lever on one side of the mounting device and the rounded opening on the other
side face upward.
NOTE:
When attached, the HP Quick Release automatically locks in position. You only need to slide the lever
to one side to remove the thin client.
10
Chapter 2 Setup
To ensure proper function of the HP Quick Release and a secure connection of all components,
Hide quick links:
Advertisement
Table of Contents
