Erifyin G T C P /I P P Rop Erties For W In D Ows X P Or 2 000 - NETGEAR WPN111 User Manual

User Manual for the NETGEAR RangeMax™ Wireless USB 2.0 Adapter WPN111
Verifying TCP/IP Properties for Windows XP or 2000
To check your PC's TCP/IP configuration:
1. On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2. Type and then click OK.
cmd
A command window opens
3. Type
ipconfig /all
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
• The IP address is between 192.168.0.2 and 192.168.0.254
• The subnet mask is 255.255.255.0
• The default gateway is 192.168.0.1
4. Type
exit
P re p a rin g Y ou r P C s for N e twork A ccess
202-10076-01
C -1 1