Table of Contents
Advertisement
to Fig.5)
H. Adjust the height so that rear side of the drainpipe slightly inclines to improve drainage.
Caution!
● Adjust the height by turning the nut with a spanner.
● Insert the spanner from the hanger bracket opening. (Refer to Fig.8)
3.3 In Case of Hanging
It is possible to install using inward facing hanger brackets by not removing the brackets from the indoor
unit. (Refer to Fig.9)
Be sure to use only the specified accessories and parts for installation work.
When installing the indoor unit, you can refer the paper pattern for installation, and make sure that the
drainage side must be 10mm lower than the other side in order to drain the condensation water fluently.
Multi Variable Air Conditioners Floor and Ceiling Type Indoor Unit
4
Advertisement
Table of Contents
