User Manual for the NETGEAR WGE111 Wireless Game Adapter
Game Console Plug-and-Go Scenario
WGE111 Wireless
Game Adapter
A
Figure 3-2: Internet Game Console Scenario
What you need.
•
Broadband Internet access through a router with an 802.11b or 802.11g wireless access point
(built in to the router or separate) without any security features enabled.
Note: If you enabled security features (like WEP, SSID broadcast off, MAC filtering, etc.) you
need to follow the instructions given in
Assistant" on page
•
A network-enabled game console.
What you do.
Connect the Ethernet cable from your WGE111 Wireless Game Adapter (A) to the Ethernet
1.
port (B) in the game console.
Make sure that the switch on the back of the WGE111 is set to the left side (labeled Internet),
2.
which corresponds to Infrastructure Mode.
Connect the power adapter to the WGE111 and verify the following:
3.
•
The power light goes on.
•
The Internet light is lit.
•
The Ethernet light is lit when connected to a network-enabled game console.
Enjoy your Internet gaming!
4.
3-4
B
"Using the NETGEAR Smart Wizard Configuration
3-9.
Gaming Console or other
Ethernet-enabled device
Basic Setup