Removing The Wg511V2 Software; Upgrading The Wg511V2 Software - NETGEAR WG511v2 User Manual

User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2

Removing the WG511v2 Software

You can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the WG511v2 Wireless PC Card program group, select
the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the WG511v2 Wireless PC Card option, and follow the screen prompts.

Upgrading the WG511v2 Software

Upgrades may be available at the NETGEAR Web site. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR Web site Support page.
3. Remove the WG511v2 software from your laptop computer.
4. Remove the WG511v2 adapter from your laptop computer, and if prompted restart your laptop
computer.
5. Run the installer that you downloaded (the file ends in .exe).
6. Follow the installer instructions, and if prompted, then restart your laptop computer.
3-12
v2.2, December 2005
Basic Setup