NETGEAR WG511v2 User Manual page 24

User Manual for the NETGEAR 54 Mbps Wireless PC Card WG511v2
e. Select the wireless network from the
drop-down list, and the wizard records
your choice.
Hidden networks do not broadcast the
Network Name (SSID). These networks
are included in the drop-down list, but
the Network Name (SSID) is blank.
If the network uses security, then the
Smart Wizard detects it.
f. Follow the Wizard steps for Security (if used) and for saving a Profile.
g. After you have reviewed the settings, click Finish.
The WG511v2 icon
initiates your wireless connection. It could take up to a minute for your wireless
connection to be established.
The Smart Wizard Settings page opens.
Figure 3-10
3. Use the status bar to verify your wireless connectivity. For more information about
connecting, see "Connecting to Wireless Networks and the Internet" on page
3-8
Figure 3-9
appears in the system tray and on the desktop. The wizard
v2.2, December 2005
Hidden
3-9.
Basic Setup