Configuring Security Profiles - NETGEAR WG302v2 Reference Manual

NETGEAR ProSafe 802.11g Wireless Access Point WG302v2 Reference Manual
• Use WPA, WPA-PSK, WPA2, or WPA2-PSK. Wi-Fi Protected Access (WPA and WPA2)
data encryption provides data security. The very strong authentication along with dynamic per
frame rekeying of WPA make it virtually impossible to compromise. Because this is a newer
standard than the other security options, wireless device driver and software availability may
be limited.

Configuring Security Profiles

You can configure up to eight unique security settings on the WG302v2.
Security Profile Settings page.Use the following steps to configure a Security Profile.
1. Connect to the WG302v2.
In the address field of your Web browser, enter the default LAN address of
http://192.168.0.228.
or log in by using the LAN address and password that you configured.
2. In the Security menu, click Security Profile Settings.
Note: If you are using a RADIUS Server, configure the RADIUS settings first, as
described in
The Security Profile Settings page appears and displays the current settings for the eight
Security Profiles.
Basic Installation and Configuration
Log in with the user name of admin and default password of password,
"Configuring the RADIUS Server Settings" on page
v1.0, May 2006
Figure 2-7 shows the
2-20.
2-13