Sony FWD-40LX2F Service Manual page 5

Caution
Provide an ample amount of space around the display
. When you set up the Display Unit, make sure there is more space around the display than that shown in
the figure below. This will allow for proper ventilation.
. Wile the unit is on, a certain amount of heat builds up inside. This can cause burns. Avoid touching the
top or rear of the unit when it is powered on or just after it has entered standby mode.
When mounting the display horizontally
10
(4)
When mounting the display vertically
20
(9 7 / )
8
Make sure that
the POWER
switch is at the
lower right.
FWD-40LX2F
FWD-40LX2X
25 (9 7 / )
8
10
(4)
25 (9 7 / )
8
20 (4)
25
(9 7 / )
8
10 (4)
2.5 (1)
Unit : cm (inches)
2.5 (1)
Unit : cm (inches)
3 (P)