NEC NLT-32HDB3 Owner's Manual page 14

Connection to External equipment
Connecting Headphone
< Side panel of the set >
Connecting PC (DTV)
HDMI1 IN (DVI) HDMI2 IN (DVI)
or
(R) (R) AUDIO (L) AUDIO (L) RGB OUTPUT RGB OUTPUT
Connecting Digital Audio
DIGITAL AUDIO
(OPTICAL) OUT Y Pb
COMPONENT IN
14
Insert the headphone plug to the headphone sock-
et of the set.
You can listen to the sound through the head-
phone. To adjust the headphone volume, press the
< Back panel of the set >
AUDIO IN RGB IN
(RGB/DVI) (PC/DTV)
< Back panel of the set >
Pr
S-VIDEO IN
button.
Connect the signal cable from the monitor output
socket of the PERSONAL COMPUTER to the
RGB IN socket of the set.
Connect the audio cable from the PC to the
AUDIO IN sockets of the set.
Press the INPUT button to select
Switch on the PC, and the PC screen appears on
the set.
The set can be operated as the PC monitor.
RGB-DTV input signal : 480p-60Hz, 576p-50Hz,
720p-50Hz, 720p-60Hz, 1080i-50Hz, 1080i-60Hz.
- Send the set's audio to external audio equipment
(stereo
system) via the Digital Audio Output (Optical).
Caution : Do not look into the optical output port.
Looking at the laser beam may damage your
vision.
How to connect
Connect one end of an optical cable to the TV
Digital Audio (Optical) Output port.
Connect the other end of the optical cable to the
digital audio (optical) input on the audio equipment.
.
PC-RGB