Verifying Tcp/Ip Properties (Macintosh); Your Internet Account - NETGEAR DG814 DSL Reference Manual

Reference Manual for the Model DG814 DSL Modem Internet Gateway

Verifying TCP/IP Properties (Macintosh)

After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by
returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP.
The panel is updated to show your settings, which should match the values below if you are using
the default TCP/IP settings that NETGEAR recommends:
• The IP Address is between 192.168.0.2 and 192.168.0.254
• The Subnet mask is 255.255.255.0
• The Router address is 192.168.0.1
If you do not see these values, you may need to restart your Macintosh or you may need to switch
the "Configure" setting to a different option, then back again to "Using DHCP Server".

Your Internet Account

For access to the Internet, you need to contract with an Internet service provider (ISP) for a
single-user Internet access account using ADSL. The Model DG814 DSL Modem Internet
Gateway includes a built-in ADSL modem that connects directly to your ADSL line.
3-8 Preparing Your Network