Table of Contents
Advertisement
Available languages
Available languages
LED
PWR
B
[
]
PL-
ACT
C
[
]
ETH
D
]
[
A02-PL301
STATUS
Off
On
Blink
Off
On
Blink
Off
On
Blink
Description/ Function
No power.
When the device is correctely
connected.
After Simple Connect
for two seconds, this LED will blink
to confirm the button press.
When
Simple
pressed for at least 10 seconds, this
LED will blink to confirm the Private
Network Name reset.
Device is not connected to a
HomePlug AV network.
This LED remains on when the
device is part of a HomePlug AV
network.
The LED colors represents the
connection
HomePlug AV network whether it is
good (red), better (amber), or best
(green).
The LED flashes to indicate network
activity.
An
Ethernet
connected.
An Ethernet device is connected.
The
LED
flashes
Ethernet activity.
ENGLISH
is pressed
Connect
rate
within
device
is
to
indicate
is
the
not
29
Advertisement
Table of Contents
