Stopping Beverage Preparation - Melitta Caffeo Barista TS Operating Instructions Manual

Before selecting a beverage, select a bean type with the "BEAN SELECT"
ƒ
button.
Before selecting a beverage, use the "Beverage amount" slider to set a
ƒ
beverage amount.
Before selecting a beverage, use the "Coffee strength" slider to set the
ƒ
coffee strength.
Information
ū When preparing Latte Macchiato and Cappuccino, the total beverage
amount is subdivided into a coffee and a milk amount according to a
specified ratio.
ū If a beverage is not prepared within 1 minute, the appliance switches to
the default settings.
Changing beverage settings during preparation
The beverage amount and the coffee strength can be changed during
beverage preparation.
During beverage dispensing (coffee or milk), use the "Beverage amount"
ƒ
slider to set the relevant beverage amount.
During the grinding process, use the "Coffee strength" slider to set the
ƒ
coffee strength.
5.8

Stopping beverage preparation

To stop beverage preparation prematurely, press the selected direct key
again.
Preparing beverages
77