Preference Features 21 System Menu; Executing Initial Setup; Setting The Time; Using The Sleep Timer - Samsung Series 4+ User Manual

Preference Features
•
System Menu

Executing initial setup

Setup
MENUm → System → Setup →
O
Configure the channels and the time when setting
up the TV for the first time or when resetting the
unit.
✎ Execute the initial setup following instructions
that the TV guides.

Setting the Time

Time
→ System → Time →
MENUm
O
The current time will appear every time you press
the INFO button.
• Clock: Setting the clock is for using various
timer features of the TV.
✎ If you disconnect the power cord, you have
to set the clock again.
Clock Mode: Set up the current time manually
or automatically.
− Auto: Set the current time automatically
using the time from a digital channel.
✎ The aerial must be connected in order to
set the time automatically.
− Manual: Set the current time manually.
✎ Depending on the broadcast station and
signal, the auto time set up may not be
correct. In this case, set the time manually.
[PH4000-Africa]BN68-05788A-ENG.indb 21
Clock Set: Set the Date and Time.
✎ Available only when Clock Mode is set to
✎ You can set the Date and Time directly by
Time Zone (depending on the country): Select
ENTERE
your time zone.
✎ This function is only available when the
✎ When selecting Manual in Time Zone,

Using the Sleep Timer

MENUm
O
ENTERE
• Sleep Timer t: Automatically shuts off
ENTERE
the TV after a preset period of time. (30, 60, 90,
120, 150 and 180 minutes)
✎ Use the ▲/▼ buttons to select a period of

Setting the On / Off Timer

O MENUm
Timer →
• On Timer: You can set up three separate On
Timer configurations. (On Timer 1, On Timer
2, On Timer 3)
Setup: Select Off, Once, Everyday, Mon~Fri,
Mon~Sat, Sat~Sun or Manual to set at your
convenience. If you select Manual, you can set
up the day you want to activate the timer.
✎ The
Manual.
pressing the number buttons on the remote
control.
Clock Mode is set to Auto.
GMT and DST will be activated.
→ System → Time → Sleep Timer →
time, and then press ENTERE. To cancel
the Sleep Timer, select Off.
→ System → Time → On Timer <or> Off
ENTERE
mark indicates the day you've
c
selected.
21
English
2014-01-17 9:15:30