Disassembly - Pioneer KEH-1800 Service Manual

7.2 DISASSEMBLY

-
Removing the Case(not shown)
1. Remove the three screws.
2. Remove the Case.
-
Removing the Cassette Mechanism Assy
(not shown)
1. Remove the four screws.
2.Disconnect the connector, and then removing the
Cassette Mechanism Assy.
-
Removing the Panel Unit(Fig.1)
Disengage the stopper at two locations
indicated
Remove the Panel Unit.
- Removing the Tuner Amp Unit(Fig.2)
Removing the two screws.
Removing the three screws.
Removing the screw.
Unbend the tabs at four locations indicated
by arrow until straight.
Remove the Tuner Amp Unit.
Panel Unit
Tuner Amp Unit
KEH-1800,1850
Fig.1
Fig.2
39