Connecting The Power Supply - Bosch VIP X1 XF Quick Installation Manual

VIP X1 XF
5.5

Connecting the power supply

CAUTION!
Only operate the VIP X1 XF in combination with an LPS/NEC
Class 2 power supply unit that has limited output and meets
the following specifications: 9 to 30 V output voltage, 0.65 A
max.
Please observe the labeling on the orange socket of the
VIP X1 XF and the correct position for the terminal block.
–
–
–
Bosch Sicherheitssysteme GmbH
Connect the power supply unit cables to the terminal
block.
Connect the terminal block to the orange socket on the
VIP X1 XF.
Insert the power supply unit plug into a suitable socket.
Quick Installation Guide
Connection | en
F.01U.269.739 | V3 | 2014.03
11