Table of Contents
Advertisement
54. Pull the heat exchanger straight upwards from
the cooling water pipes and the cooling water hose.
Replace the O-ring on the heat exchanger and the
sealing rings on the cooling water pipes.
55. Remove the cooling water pipe between the ex-
haust manifold and the oil cooler. Tool width: 10 mm.
56. Remove the exhaust manifold. Tool width: 13
mm.
57. Pull off the hose (1) from the carburetor and re-
move the screw holding the oil dipstick tube. Tool
width 1/2".
58. Remove the fuel pipe from the fuel pump. Tool
width: 12 mm.
59. 251DOHC, AQ171. Pull off the vacuum hoses
(1) from the intake manifold and the cold starting de-
vice as well as the connection (2) from the magnetic
valve on the carburetor.
45
Hide quick links:
Advertisement
Table of Contents
