Rear Tail, Stop And Turn Signal Lamps; Rear Liftgate Mounted Back-Up Lamps; Center High-Mounted Stop Lamp (Chmsl); Rear License Lamp - Dodge Durango 2016 Owner's Manual

Hide thumbs Also See for Durango 2016:

Table of Contents

668 MAINTAINING YOUR VEHICLE

CAUTION! (Continued)

• Always use the correct bulb size and type for

replacement. An incorrect bulb size or type may

overheat and cause damage to the lamp, the socket

or the lamp wiring.

Rear Tail, Stop And Turn Signal Lamps

The rear tail, stop, and turn signal lamps are LED. See

your authorized dealer for replacement.

1. Raise the liftgate.

2. Use a fiber stick or flat blade screw driver to pry the

lower trim from the liftgate.

3. Back-up lamps are now visible. Rotate socket(s) coun-

ter clockwise.

4. Remove/replace bulb(s).

5. Reinstall the socket(s)

6. Reverse process to reinstall the liftgate trim.

The center high-mounted stop lamp is an LED assembly.

See your authorized dealer for replacement.

The rear license lamps are LED. See your authorized

dealer for replacement.

Table of Contents

Durango 2016