General Functions
Turning your handset on
Ensure that your USIM card is in your handset and the battery is
charged.
Press and hold the
key until power is on.
Enter the USIM PIN code that was supplied with your USIM
card if PIN code setting is on.
After a few seconds you will be registered on the network.
Turning your handset off
Press and hold the
key until power is off.
There may be some delay while the handset powers down.
Do not re-power the handset during this time.
U8110 User Guide l l General Functions
Access Codes
You can use the access codes described in this section to avoid
unauthorized use of your phone. The access codes (except
PUK and PUK2 codes) can be changed by using the Change
codes feature [Menu 9.6.2].
PIN code (4 to 8 digits)
The PIN (Personal Identification Number) code protects your
USIM card against unauthorized use. The PIN code is usually
supplied with the USIM card. When the PIN Code Request is
set to Enable, your phone will request the PIN code every time it
is switched on. When the PIN Code Request is set to Disable,
your phone connects to the network directly without the PIN
code.
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some USIM cards, is required to
access functions such as Fixed Dial Number. These functions
are only available if supported by your USIM card.
26