Battery Level Indicator - Suunto x9i User Manual

Charging the battery through your PCs USB connector
To charge the battery through your PCs USB connector:
1. When your PC is on, plug the USB cable into the USB port and attach its data clip
firmly to your Suunto X9i.
2. Wh
en the battery level indicator is full, disconnect the charger from the mains outlet.
Your Suunto X9i is now ready for use.

Battery level indicator

The battery level indicator displays an estimate of the remaining battery level. The
indicator value is obtained by referencing the current power consumption against
the measured discharge state of the battery. The current power consumption varies
depending on the function used. Therefore the indicator may show a lower value e.g.
when using GPS than when only displaying time. When turning the GPS on and off,
in some states during GPS usage and when unplugging the charger, the indicator
reading may be unstable. This is normal and is caused by fluctuating current levels
at these instances. For the best estimation for remaining battery level, turn off the
GPS, move to time mode and wait a few minutes for the reading to stabilize.
33