7. Level 2 Repair
Disassembling
1
1) Unscrew 6 screws of back panel
2) Unscrew 2 screws of top deco
1
1) Unscrew without causing the damage or scratches on
the case.
1) Disassemble connectors of Camera and
3
Touch Key.
2) Disassemble connectors of Motor, Earjack
FPCB
1) When dismantle the camera connector, be careful to
avoiding damage on ANT connectors.
This Document can not be used without Samsung's authorization
2
SAMSUNG Proprietary-Contents may change without notice
2
1) Pull back the rear case with holding bottom
side of battery.
1) If you use any tool to disassemble, be careful to avoid
to damage or scratch on the case.
1) Disassemble connectors of LCD FPCB
4
※ Be careful not to climb on PBA of VGA
Camera & TOUCH KEY FPCB connetctor
1) If you use tools to disassemble, avoid touching the
FPCB.
7-4