Level 2 Repair; Assembling - Samsung GT-I8150 Service Manual

7. Level 2 Repair

Assembling

1
1) Connect the Main Camera connector.
1) After pressing Connector once, Check the connect
status
3 1)LCD FPCB insert the right of the central hole
by BRACKET. And then Assemble and
BRACKET FRONT ASS'Y.
1) When assembling the BRACKET, be careful to avoiding
damage on TOUCH KEY connectors.
2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Place LCD starting from the
side of Front and push the outline of LCD
with hand lightly to attach it completely
2) Open TSP connector on LCD and
insert TSP FPCB alining with guide line
3) adhere insulating tape according to the
TSP IC guide line and press it gently and
evenly
1
1) Don't touch with FPCB contact point,
Press evenly to the entire actuator.
4
1) Place VGA CAMERA on it's position on
BRACKET.
2) Assemble VGA CAMERA RUBBER on it's
position guided by RIBs.
1) Beware of VGA CAMERA's direction when assembling,
and push the VGA Camera rubber after assembling.
7-1
Under
2,3