Frequent Maintenance Procedures; Cleaning The Bowls; Cleaning Condensate Drains - Cornelius JT20 Owner's Manual

FREQUENT MAINTENANCE PROCEDURES

C B
LEANING THE
1. Before removing the bowls, turn off both the refrigeration and spray switch. Unplug unit from power source.
2. Drain beverage from bowls.
3. Remove pinch tube by pushing handle until it stops.Pull up on pinch tube until it is free, then remove handle
(see Page 8). Lift off bowls, drip trays, and covers and clean.
4. Clean as described in "Cleaning the Dispenser" (Page 6).
5. After cleaning, assemble as described in "Assembling the Dispenser" (Page 6). Replace push handle, and
insert pinch tube into bowls.
C C
LEANING ONDENSATE
1. To remove condensation drains, push in on front panel just under drain and pull down with fingers (see Fig.
8).
2. To replace condensate drains, hold drain against front panel under rectangular hole (opening in side of
drain should be toward front panel). Push up through hole until drain snaps into place (see Fig 9).
Towards Front
Panel
© 2014, Cornelius Inc.
OWLS
D
RAINS
Figure 8.
Figure 9.
- 9 -
JetSpray Owner's Manual
Publication Number: 621058565INS