Restoring Factory Settings; Using Internet Connection - SanDisk Connect User Manual

Wireless flash drive

Hide thumbs Also See for Connect:

Table of Contents

4. M anaging t he W ireless D rive

Restoring Factory Settings

If you forget your password or if your Wireless Drive becomes unresponsive, you can

reset the Drive to its default factory settings. This erases your password and forces

the Drive to reboot, but it does NOT delete any content stored on the Drive. Once the

Drive has rebooted, you can set a new password.

To reset the Drive,

1. Turn off the Wireless Drive.

2. Hold in the Wi-Fi button for 20 seconds.

After about 20 seconds the amber and blue flash alternately two times (this is the

actual reset) and the drive resets and stays on.

Your mobile device or computer can wirelessly access content on your Drive and at

the same time remain connected to the Internet as long as a wireless Internet

network is available. (Some wireless networks might block this functionality.)

1. On the Settings screen, tap Internet Connection to open the Internet

Connection screen:

SanDisk

Wireless Flash Drive User Manual for

Managing W ireless D rive S ettings

or iPod

Table of Contents