SanDisk Connect User Manual page 34

4. M anaging t he W ireless D rive
The new Firmware is copied to the Drive:
5. Follow the on-screen instructions to turn off the Drive and connect it to a USB
charger or a computer:
Both the blue and the amber LEDs blink rapidly.
6. Wait for several seconds after the rapid flashing stops before ejecting the Drive
from the charger or computer.
7. After ejecting the Drive, turn it back on:
Note: With every app update, we release two firmware versions. The app identifies which
drive version it is communicating with (16GB/32GB or 64GB) and assures the proper
firmware will be loaded on your Drive when following the process above.
SanDisk Wireless Flash Drive User Manual for or iPod
Updating t he F irmware