Specifications - Alto ts115a truesonic Quick Start Manual

SPECIFICATIONS

Output Power:
Crossover:
Max SPL @ 1m:
Frequency Response:
Low Frequency:
High Frequency:
Coverage:
Connectors:
Cabinet:
External Control:
Power supply:
Dimensions (H x W x D):
Weight (speaker only):
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Inrush current at initial switch-on: 3.61 A
Inrush current after power supply interruption: 3.91 A
400 W Continuous RMS (335 W LF Class D + 65 W HF Class AB)
800 W Peak (670 W LF + 130 W HF)
2 kHz
122 dB Continuous, 125 dB Peak
48 Hz – 18 kHz (@ -10 dB)
15" (381 mm) woofer, 2" (51 mm) voice coil
1" (25 mm) neodymium driver
80°/100° H x 60° V nominal
Input: 1/4" TRS or XLR
Link: XLR
Polypropylene, trapezoidal
Volume control, power-on with LED, clip limiter with LED, ground lift
100-120V/220-240V, 50/60 Hz
26.7" x 16.9" x 15.2" (679 mm x 430 mm x 385 mm)
48.6 lbs (22 kg)
www.altoprofessional.com
MANUAL VERSION 1.4