Front Output Shaft Seal Installation - Chevrolet Trailblazer Service Manual

To Install:
1. Install a J 45236-2 front output shaft seal installer onto the front output shaft.
2. Install the front output shaft seal over the J 45236-2 front output shaft seal installer.
3. Install the front output shaft seal onto the front output shaft using a J 45236-1 front
output shaft seal installer.
4. Remove the J 45236-1 and J 45236-2 front output shaft seal installer from the front
output shaft.
5. Install the dust shield onto the front output shaft.
6. Install the front propeller shaft into the vehicle.
7. Check the fluid level in the transfer case.
8. If equipped, install the transfer case shield onto the transfer case.
9. If equipped, install the fuel tank shield onto the fuel tank.
10. Lower the vehicle.

Front output shaft seal installation