Volume And Sound For Microphone Announcements; Functions In The Microphone Menu; Volume And Sound For External Announcements And Alarms; Functions On The Ccs - Bosch CCS Operating Instructions Manual

50 | en

Volume and sound for microphone announcements

Functions on the CCS

Function
Adjust the volume
Set the distribution of the
volume between the
announcement and the
background audio
playback (MIX)
Open the menu

Functions in the microphone menu

1 Menu level
st
BASS
TREBLE
Volume and sound for external announcements and alarms (driver warning
system)
You can adjust the volume and sound for
external announcements (e.g. navigation
Functions on the CCS
Function
Adjust the volume
Set the distribution of the
volume between the
announcement and the
background audio playback
(MIX)
Open the menu
09.2014
Action
f Turn the control knob ?
f Whilst keeping the control
knob ? pressed down, turn
it
f Briefly press the MENU
button D
2 Menu level Function
nd
BASS -7 ... +7 Adjust the bass level
TREBLE -7 ... +7 Adjust the treble level
Action
f Turn the control knob <
f Whilst keeping the control
knob < pressed down, turn
it
f Briefly press the MENU
button D
Adjusting the volume and sound
Note
Only whilst the microphone is
switched on.
Only whilst microphone 2 or 3
(MIC2 / MIC3) is switched on.
For sound adjustments in the
menu, see the next section.
announcements and phone calls played over the
cockpit loudspeakers) as well as for alarms.
Note
Only during an active
announcement.
Only for navigation announce-
ments and phone calls. Only
during an active announcement.
Only during an active alarm.
For sound adjustments in the
menu, see the next section.
Robert Bosch Car Multimedia GmbH