Detroit Diesel MBE4000 Application And Installation Manual page 197

MBE4000 APPLICATION AND INSTALLATION
Two sensors are not easily visible from the left-hand side of the MBE4000 engine. The Intake
Manifold Pressure/Temperature Sensor is located on the right-hand side of the charge air
manifold, behind the #2 cylinder head. The Engine Oil Pressure/Temperature Sensor is located at
the base of the oil filter. See Figure 13-6 for sensor locations on the MBE4000 engine.
NOTE:
The Engine Oil Level Sensor, if used, is located at the bottom of the oil pan.
13-9
All information subject to change without notice. (Rev. 03/06)
7SA250 0603 Copyright © 2006 DETROIT DIESEL CORPORATION