3-2-2.
You can access the HDD easily by turning the system to the rear side on a 12"
system. Please see detailed procedure below.
1.
Turn to the rear side of the system
to access the HDD door.
2.
Unscrew the screw (x1) securing
the HDD door to the rear cover of
the system.
3.
Disconnect the SATA cable from
the drive.
4.
Reverse above steps to replace
the hard drive disk.
3-3.
Power Adapter Installation
The system is equipped with a 65W power adapter, please plug it in as shown
below.
1.
Please connect the power adapter
to the DC-IN Connector on the I/O
panel.
HDD replacement for 12.1" system
8