Hdd Replacement; Hdd Replacement For 8.4" System - Saturn AIO 8" User Manual

3-2.

HDD Replacement

To remove and replace the HDD, please follow the steps below. The procedure is
different depending on the 8.4" and 12.1" system being installed.
3-2-1.
The HDD is installed on the motherboard, you need to uncover the rear cover
first to access it. If your system is equipped with a stand or a wall-mount bracket,
please remove them first.
1. Turn to the rear side of the system
and open the rear cover by
unfastening all the screws (x6).
2. Gently
to various connectors connecting
the motherboard to the LCD
screen.
3. Unscrew the screw (x1) of the
HDD holding bracket.
4. Disconnect the HDD connector
and remove it with the holding
bracket from the motherboard.
5. Unfasten the screws (x2) to
separate the HDD holding bracket
from the hard drive disk.
6. Reverse the steps above to
replace the hard drive disk.
7

HDD replacement for 8.4" system

flip up the rear cover due