Specific Absorption Rate (Sar) Of Cell Phones - LG LGL23 G FLEX Basic Manual

*1 Continuous standby times are measurements in a static
state.
*2 Changes according to objects obstructing devices and
signal reception.
*3 Specifications provided in Bluetooth
communication between Bluetooth
accordance with their intended use.
*4 Depending on the phonebook data, it may not be displayed
properly on the other party's device.
*5 Compatible only on some car navigation system. Refer to
au website for usage.
*6 Continuous viewing time may change depending on the
usage condition.
memo
• The continuous call time and continuous standby time may
drop to less than half depending on the battery charging
status, usage environment such as temperature, reception
condition at the location where this product is used, and
the function settings.
® standards for making
This model of "LGL23" mobile phone complies with
® compatible devices in
Japanese technical regulations and international guidelines
regarding exposure to radio waves. This cell phone has
been designed in observance of the Japanese technical
regulations regarding exposure to radio waves
to exposure to radio waves recommended by equivalent
international guidelines.
These international guidelines were set out by the
International Commission on Non-Ionizing Radiation
Protection (ICNIRP), which is in collaboration with the
World Health Organization (WHO), and the permissible
limits include a substantial safety margin designed to
assure the safety of all persons, regardless of age and
health condition. The Japanese technical regulations and
international guidelines define the limits using a unit of
measurement known as the Specific Absorption Rate (SAR),
which represents the average amount of radio frequency
energy absorbed by the human head. The SAR limit for cell
phones is 2.0 W/kg. The highest SAR value for this mobile
phone when tested for use at the ear is 0.367 W/kg.
There may be slight differences in SAR levels among
individual products, but they all satisfy the limit. The actual
SAR of this cell phone while talking on the phone can be
well below that indicated above. This is due to automatic
changes in the power level of the cell phone to ensure it
only outputs the minimum power required to communicate
with a base station. Therefore in general, the closer you are
to a base station, the lower the power output of the cell
phone.
Specific Absorption Rate (SAR)
of Cell Phones
(*1) and limits
73