Advertisement
2
LS9203 Setup Instructions
Introduction
This document provides instructions for programming the Symbol LS9203 scanner for use with an Autogas REGAL Touch.
Required Hardware
• Cable
• CBA-R01-S07PA (RS232 Cable, DB9 Female, TxD on 2, 7 ft. Straight), or
• CBA-R02-C09PA (RS232 Cable, DB9 Female, TxD on 2, 9 ft. Coiled).
• Power Supply
• 50-14000-008 (110VAC for N. America), or
• 50-14000-009 (220VAC for Europe and Asia), or
• 50-14000-010 (100VAC for Japan).
Scanner Setup
The following parameters need to be set:
• Set Defaults
• Standard RS-232
• Baud Rate 9600*
• Parity Space
• Hardware Handshaking: None*
• Software Handshaking: None*
• 2 Stop Bits
• 7-Bit
• Scan Data Transmission Format: Append suffix value "1013".
* Already set by default.
Advertisement
