Mp3/Wma Folder Mode (Only For Mp3/Wma Files); Advanced Cd Or Mp3/Wma Disc Playback - Pioneer x-hm50-k Operating Instructions Manual

Advanced CD or MP3/WMA disc
playback (continued)
n Programmed play (MP3/WMA)
1
Whilst in the stop mode, press the MEMORY button to
enter the programming save mode.
2
Press the PRESET (
control to select the desired folder.
Then press the or
to select the desired tracks.
3
Press the MEMORY button to save the folder and track
number.
4
Repeat steps 2 - 3 for other folder/tracks. Up to 32
tracks can be programmed.
5
Press the / (CD/USB
To cancel the programmed play mode:
Press the (CD/USB
"Memory Clear" and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEM"
indicator will be displayed. Press the MEMORY button
repeatedly to go to the last programme memory. Then
follow steps 2 - 3 to add tracks. The new tracks will be
stored after the last track of the previous programme.
Notes:
l When a disc is ejected, the programme is automatically
cancelled.
l If you press the STANDBY/ON button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
l During the programme operation, random play is not
possible.
or ) button on the remote
button on the remote control
/ ) button to start playback.
) button. The display will show
MP3/WMA folder mode (only for MP3/
WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
l Your downloaded song/files are for personal use only.
Any other usage of the song without owner's
permission, is against the law.
n About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folders can be selected by the FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next
folder will be selected.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
1
ROOT folder is set as folder 1.
2
As for folders inside ROOT folder (Folder A and Folder
B), the folder which is recorded earlier on the disc will be
set as folder 2 and folder 3.
3
As for folder inside Folder A (Folder C and Folder D), the
folder which is recorded earlier on the disc will be set as
folder 4 and folder 5.
4
Folder E that is inside Folder D will be set as folder 6.
l The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
l For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from those
played back when folder mode is turned off.
FOLDER A
ROOT
(FOLDER 2)
(FOLDER 1)
FOLDER B
(FOLDER 3)
En-14
FILE 3
FOLDER C
FILE 4
(FOLDER 4)
FILE 5
FOLDER D FILE 6
(FOLDER 5) FILE 7
FILE 8
FOLDER E
(FOLDER 6)
FILE 1
FILE 2
FILE 9
FILE 10